Factory-Manufactured Venturi Hoppers for Efficient Drilling Mud Mixing

TRSLH series Jet Mud Mixer is special equipment to prepare and increase the drilling fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration. The effect is more prominent matching with Shear Pump. Jet Mud Mixer is a unit used together with the solids control system for petroleum grilling and horizontal directional drilling. The unit includes one sand pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves.At the same time, we can make Twin-Jet Mud Mixer according to the user requirements. Mixing hopper is used to prepare or aggravate drilling fluid,change the density,viscosity,water loss of the drilling fluid. If put the drilling fluid materials and chemical addition agents into the mud tank directly,the materials and agents may precipitate or conglobate,with the decive,the materials and agents can be mixed well.

Model	TRSLH150-50	TRSLH150-40	TRSLH150-30	TRSLH100
Capacity	240m3/h	180m3/h	120m3/h	60m3/h
Centrifugal Pump	TRSB8X6-13J（55KW）	TRSB6X5-12J（45KW）	TRSB5X4-13J（37KW）	TRSB5X4-13J（37KW）
Working Pressure	0.25~0.40Mpa	0.25~0.40Mpa	0.25~0.40Mpa	0.25~0.40Mpa
Feed Inlet	DN150	DN150	DN150	DN150
Nozzle Dia.	50mm	42mm	35mm	35mm
Hopper Size	600 X600m	600 X600mm	600 X600mm	600 X600mm
Burden Speed	≤100kg /min	≤80kg /min	≤60kg /min	≤60kg /min
Mud Density	≤2.8g/cm³	≤2.4g/cm³	≤2.0g/cm³	≤2.0g/cm³
Mud Viscosity	≤120s	≤120s	≤80s	≤80s
Dimension	2200×1700×1200	2200×1700×1200	2000×1650×1100	2000×1650×1100
Weight	1680kg	1400kg	1280kg	1100kg

6 inch high shear low pressure mud hopper Complete with 2 in(also 1.5 inch special lower volume nozzle, venturi hopper, funnel, sack table, 6 inch butterfly, valve all mounted on a base. This hopper with 2 inch nozzle handles 800-900 pounds of barite per minute. Three(3) inch male NPT inlet and 6 inch weld neck outlet. (Other end types are available). Unit primed with carbozinc and painted with finish coat. 4 inch high shear low pressure mud hopper Complete with 1.5 inch nozzle, venturi hopper, funnel, sack table, 4 inch butterfly, valve all mounted on a base. The hop-per with 1.5 inch nozzle handles 5-600 pounds of barite per minute. Two (2) inch male NPT inlet and 4 inch weld neck outlet. (Other end types are available). Unit primed with carbozinc and painted with finish coat.

Model	Work Press	Inlet Size	Hopper Diameter	Weight
TRSL150-50	0.2～0.4mPa	DN150	600×600mm	170kg
TRSL150-40	0.2～0.4mPa	DN150	600×600mm	170kg
TRSL150-30	0.2～0.4mPa	DN150	600×600mm	165kg
TRSL100	0.2～0.4mPa	DN100	500×500mm	140kg

Hoppers can be Venturi hopper.
Ideal design on sufficient working pressure make pumps higher performance.
New style with better feasibility under different working condition.
Meet drilling fluids weighting demand for 1500m ~ 9000m well drilling.
Hopper and pump connected with pipelines. More flexible on hopper and pump quantities.
Centrifugal pump is mechanical seal type. Reliable and durable.
Easy to operate and maintain.

Drilling Mud Mixing Hopper in the mud system is used to mix mud. In the oil and gas drilling plays a very important role. The centrifugal sand pump in horizontal directional crossing and role in the process of slurry shield also no less. TR solid control is an exporter of Drilling Mud Mixing Hopper. We are an exporter of drilling fluids venturi hopper. TR solids control is the designed,selling,production,service and delivery of Chinese based manufacturer. We will provide the high quality mud hopper and best service. Your best jet mud mixer hopper start from TR solids control.