You are here:Home > PRODUCTS > Desilter >

Desilter

Desilter is the third class solid control equipment to treat the drilling fluids. That is a centrifugal device for removing very fine particles, or silt, from drilling fluids to keep the amount of solids in the fluid at the lowest possible point. Usually, the lower the solids content of mud, the faster is the rate of penetration.

Application: A desilter is used to separate silts from drilling muds. The cut point can be as low as 4“. As muds are being used in drilling operations, they are contaminated with silts. In order to use again these muds, it is necessary to separate silts and also to recycle muds to dispose them at the end of work duty.
Design Principles: TR manufactures TRZQJ series desilters according to the size of the cone diameter, they are divided into Desander and Desilter. Usually the cone diameter is less than 6″is called Desilter, and used as the third control equipment in drilling operation. We commonly used 5 "and 4" cone to separate solid-phase particle size 15-47μm in the drilling fluid. Based on customer requirements and capacity, we can select groups of cones into Desilter.

The TR 4”desilter can handle up to 1056 GPM of drilling fluid.

                                        TRZQJ Desilter Technical Parameters

Model TRZQJ100S TRZQJ100
Capacity 1056GPM 1056GPM
Screen Area 1.0m2  without underflow screen
Cone Size 4" 4"
Cone quantity 2-12 2-12
Work Pressure 0.15~0.35Mpa
Matching Pump TRSB4×3-12(11KW),TRSB5×4-13(30KW)
TRSB6×5-13(37KW),TRSB8×6-13(55KW)
TRSB4×3-12(11KW),TRSB5×4-13(30KW)
TRSB6×5-13(37KW),TRSB8×6-13(55KW)
Inlet Size 75-150mm
Outlet Size 125-200mm
Separationg ≥15μm

Advantages of TRZQJ series desilter:
1. The cyclone of drilling fluid desilter selected polyurethane as it is durable service life, light weight and easy to maintain 
2. A high separation capacity, a wide range of granularity separation which can remove solid particles ≥ 47μm 
3. Each drilling mud cyclone inlet and outlet are equipped with ball valve, you can always adjust the amount of work in addition to mud control, simple operation, easy maintenance.
4. Symmetrical distribution of machine makes cyclone distribution reasonable and stable.
5. Low noise, large capacity, a long usage time of screen.
TR is a professional manufacturer of solid control system/equipment in china. We will provide our clients high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. You are welcomed to consult or visit us any time.

< /div> dtl_product2.aspx?id=31

Inquiry

Content:*
Your Name:*
Gender:
Your e-mail:*
Telephone:*
Company name:
Country:*
Address:
Date:* 看不清?点击更换