centrifuge decanter


    Drilling Mud decanter centrifuge adopts centrifugal force to separate solid particles out of drilling fluid. Different solid or particle have different density and flow speed, drilling mud decanter centrifuge also can separate particles as different size and density. Drilling mud decanter centrifuge is widely used in oil and gas drilling, chemical, foodstuff, pharmacy, mineral beneficiation, water treatment, etc. industries.
    The feed enters the bowl through a stationary inlet tube and is accelerated smoothly by an inlet rotor. The resulting drilling mud decanter centrifuge forces make the solids collect on the wall of the bowl. The conveyor and the bowl rotate in the same direction, but at different speeds, which has the effect of moving the solids towards the conical end of the bowl for removal.
Drilling Mud decanter centrifuge,Mud decanter centrifuge,TR decanter centrifuge, Shale shaker, TR Solid Control, Shale Shaker screen       Drilling Mud decanter centrifuge,Mud decanter centrifuge,TR decanter centrifuge, Shale shaker, TR Solid Control, shale shaker screen
Working Principle:
    Mixing with the acceleration phase: the material into the mix and get into the correctly predicted to accelerate, to ensure that the best state of the material into the separation zone.
   Clarify the stage: the role of the centrifugal, the materials in the drum line segments rapid separation and sedimentation, the supernatant was separated in the drum weir discharge port.
   Compression stage: the propeller will be sent to the discharge side of solid deposition, the material under the action of the centrifugal force can be further compressed, and the release of pore water.
   Compression in the right section: the drum section of the cone, the material produced by the specially designed biaxial compression, screw conveyor   family properly designed, produced along the axis of extrusion pressure.  
The advantages of decanting centrifuge
    1. horizontal spiral unloading settlement centrifuge the effect except sand is good. With many years development and production of centrifuge experience, and after a lot of field test, LWF series of centrifuges subduction zone parameters and way of feeding the optimization design, make the centrifuge except sand effect increases greatly, and have same specification With import centrifuge
    2. horizontal spiral unloading centrifuge consum low energy, work load are light. And productivity double than the original, power does not increase, and work with centrifuge, motor load no more than 80% of the rated power.
   3. horizontal spiral unloading settlement centrifuge work reliable, long service life. Centrifuge key components of the propellers, with thick plate best manufacture, exterior wear-resisting layer thickness thick one times than the original, ensure centrifuges use long life. The main bearing imported high quality bearing, differential with high precision hard surface gears transmission. These measures, to become a kind of very centrifuge "shaky" equipment, adapt the drilling bad working environment.
   4. horizontal spiral unloading settlement centrifuge vibration are low noise. By improving the centrifuge rotational part machining accuracy and the dynamic balance accuracy, of the centrifuge vibration and noise dropped to a low level
  5. Low vibration anddnoise It can makethe centrifuge vibration and noise down to very low levels through increasing the processing accuracy and precision balancing of rotating printing drilling fluid centrifuge.

                       Decanting Centrifuge Technical Parameters

Model

TRLWF450x842N

TRLWF450x1000N

TRGLW3551250N

TRGLW355x1250

TRGLW600x1500

Bowl Diameter

450mm(17.7inch)

450mm(17.7inch)

355mm(13.9inch)

355mm(13.9inch)

600mm(23.6inch)

Bowl Length

842mm(33.1inch)

1000mm(39.3inch)

1250mm(49.2inch)

1250mm(49.2inch)

1500mm(59inch)

Max Capacity

40m 3 /h

60m3 /h

40m3 /h

60m3 /h

90m3 /h

Rotary Speed

1800r/min

1800r/min

3200r/min

0~3200r/min

2600r/min

G-Force

815

815

2035

2035

2268

Feed pump

5.5kw

7.5kw

7.5kw

7.5kw

11kw

Separation point

5~7m

5~7m

2~5m

2~5m

2~5m

Main Drive

22kw-4p

30kw-4p

30kw-4p

37kw-4p

55kw-4p

Back Drive

5.5kw-4p

7.5kw-4p

7.5kw-4p

7.5kw-4p

15kw-4p

Weight

2550kg

2700kg

2950kg

3000kg

4000kg

Dimension

2360x1850x1750mm

2600x1860x1750mm

2900x1850x1750mm

2900x1950x1750mm

3200x1700x1800mm

  (Note: Rotary speed can be adjustable as per user's requirements) 

   Drilling Mud decanter centrifuge,Mud decanter centrifuge,TR decanter centrifuge, shale shaker, TR Solid Control, shale shaker screen Drilling Mud decanter centrifuge,Mud decanter centrifuge,TR decanter centrifuge, shale shaker, TR Solid Control, shale shaker screen
Xi'an Tianrui Petroleum Machinery CO.,LTD Copyright © 2012 trsolidcontrol.com All Rights Reserved.Powered by: Xi'an Yiheyi Technology Co.,Ltd

Spider Map Shaanxi record number:9584560